salem
February 11th, 2010, 01:55 PM
Frame is 20" for 26" wheels with a roughly 23.5" effective top tube, DISK ONLY, and works well with a 80-100mm travel fork. It was ridden about a year and half. Light frame, a little over 3 pounds.
There is a small ding (say about 1mm deep) on the bottom of the down tube near the bottom bracket. I filled the depression with Loctite Weld-it high strength epoxy to protect the area and rode it for a year after that with no issues.
Pictures (including dinged area): http://pics.bikerag.com/showgallery.php?cat=1274
You can phone me (between 7am-9pm EST only please) at: 860 four-thirty thirteen-seventeen
There is a small ding (say about 1mm deep) on the bottom of the down tube near the bottom bracket. I filled the depression with Loctite Weld-it high strength epoxy to protect the area and rode it for a year after that with no issues.
Pictures (including dinged area): http://pics.bikerag.com/showgallery.php?cat=1274
You can phone me (between 7am-9pm EST only please) at: 860 four-thirty thirteen-seventeen