heckler19
November 23rd, 2009, 04:33 PM
I'd like to clear out the following parts and components, some old, some new:
Niner 29er Reynolds 853 steel fork, 490mm axle to crown, disc only, steerer cut to 6 7/8, a few minor scratches but in very nice overall shape. Should fit most medium or smaller 29er frames-- $90
Classic Marzocchi Z2 Atom Bomb fork, bolt on crown, 80mm travel, open bath damper and coil spring, external rebound and preload adjustments, very little use, in great shape other than a few scratches on the lowers. 1 1/8 steerer cut to 6 5/8. Manual and bolt on hanger for canti brake cable included. At one time, there were 1 inch steerers available for this fork, so it might be a way to fit a suspension fork to that retro hardtail-- $80
Truvativ Stylo 180mm external bb type single speed crankset. Includes bashguard, new unramped 32t ring, but no bb (uses readily available Truvativ/SRAM GXP bb). Has scratches at the end of the arms and some ankle polishing, but pedal threads and splines are good and the crank is perfectly functional-- $55 (or $45 if you don't need the ring and bashguard)
SDG I-Beam seatpost/seat combo, 27.2 post with 350mm shaft, Bel-Air SL saddle, used but in good overall shape, no tears or significant scuffs on saddle, 480 gms total on my digital scale-- $40
Syncros ti square taper bottom bracket, 113mm spindle, english threaded, cartridge bearings with double row bearings on drive side. Very rare, very light (160 gms), made in Canada, appears to have had little use. Bearings spin butter smooth, includes extra drive side cup and bearing. Installation uses standard Shimano splined bb tool, separate lockrings allowing fine tuning of chainline (SSr's take notice). The drive side lockring is included, but you will have to dig up a lockring for the other side-- $40 or make me an offer
Late model SRAM XO short cage rear derailleur, carbon cage, a few tiny scratches but in great overall shape. Perfect for your weight weenie single ring 1X9 or 1X8 setup-- $125
New in package DMR STS Simple Tension Seeker tensioner for converting a geared bike to single speed. Highly rated design from England-- $20
New, mounted but never used Nevegal 29X2.2 tire (1). One of the bigger tires available for 29ers, perfect for a RIP 9 or one of the new long travel 29er bikes-- $20
New, take-off Time ATAC pedals. Grey plastic bodies, no cleats included, I have no idea what model these are, but take a look at the pictures-- $20 or make me an offer
The prices do not include shipping, TBD with buyer. I would welcome and prefer local pickup and cash payment; otherwise, payment by PayPal or clear bank check. Feel free to contact me at alanrtinti@cox.net with any questions or for more detailed pics.
Niner 29er Reynolds 853 steel fork, 490mm axle to crown, disc only, steerer cut to 6 7/8, a few minor scratches but in very nice overall shape. Should fit most medium or smaller 29er frames-- $90
Classic Marzocchi Z2 Atom Bomb fork, bolt on crown, 80mm travel, open bath damper and coil spring, external rebound and preload adjustments, very little use, in great shape other than a few scratches on the lowers. 1 1/8 steerer cut to 6 5/8. Manual and bolt on hanger for canti brake cable included. At one time, there were 1 inch steerers available for this fork, so it might be a way to fit a suspension fork to that retro hardtail-- $80
Truvativ Stylo 180mm external bb type single speed crankset. Includes bashguard, new unramped 32t ring, but no bb (uses readily available Truvativ/SRAM GXP bb). Has scratches at the end of the arms and some ankle polishing, but pedal threads and splines are good and the crank is perfectly functional-- $55 (or $45 if you don't need the ring and bashguard)
SDG I-Beam seatpost/seat combo, 27.2 post with 350mm shaft, Bel-Air SL saddle, used but in good overall shape, no tears or significant scuffs on saddle, 480 gms total on my digital scale-- $40
Syncros ti square taper bottom bracket, 113mm spindle, english threaded, cartridge bearings with double row bearings on drive side. Very rare, very light (160 gms), made in Canada, appears to have had little use. Bearings spin butter smooth, includes extra drive side cup and bearing. Installation uses standard Shimano splined bb tool, separate lockrings allowing fine tuning of chainline (SSr's take notice). The drive side lockring is included, but you will have to dig up a lockring for the other side-- $40 or make me an offer
Late model SRAM XO short cage rear derailleur, carbon cage, a few tiny scratches but in great overall shape. Perfect for your weight weenie single ring 1X9 or 1X8 setup-- $125
New in package DMR STS Simple Tension Seeker tensioner for converting a geared bike to single speed. Highly rated design from England-- $20
New, mounted but never used Nevegal 29X2.2 tire (1). One of the bigger tires available for 29ers, perfect for a RIP 9 or one of the new long travel 29er bikes-- $20
New, take-off Time ATAC pedals. Grey plastic bodies, no cleats included, I have no idea what model these are, but take a look at the pictures-- $20 or make me an offer
The prices do not include shipping, TBD with buyer. I would welcome and prefer local pickup and cash payment; otherwise, payment by PayPal or clear bank check. Feel free to contact me at alanrtinti@cox.net with any questions or for more detailed pics.