PDA

View Full Version : 07 Surly 1x1, medium


bdee
April 21st, 2008, 03:30 PM
Hi all,

I'm parting with my lime green 1x1 with matching Velocity hoops. If you like the color green this is the bike for you! Here's the spec and look below for some extras as well:

Medium (18") 1x1 frame - all the details are on the Surly site.http://www.surlybikes.com/1X1.html

Wheelset: Hugi hubs (hayes branded) laced to Velocity rims. Rims were powdercoated to match the frame by the original owner. These hubs are friggin' sweet and will last a loooong time.

Tires: MAxxis Larsen 2.3s. Very nice SS tires, they roll fast and take the edge off.

Crankset: LX 170mm with a Spot bashguard and a 32t Surly Stainless ring

Cog: 20t Surly cog

Chain: Sram PC 58 8spd

Tensioner: Surly Tugnutt

Seatpost clamp: Surly Constrictor

Post: Thomson

Saddle: Bontrager Race

HS: FSA Pig

Stem: Race Face Prodigy 115

Bar: Ritchey Rizer SC

Grips: Oury ODI lock on

Levers: Avid Speed dial Ti

Cables - Avid Flak Jacket (need to install the front still for whoever buys it).

Brakes: Avid BB5 up front, and a BB7 in the rear. Roundagon rotors.

Extras: The other BB7 brake caliper I have (never got around to swapping out the front) and an 18t Surly cog.

I've owned the bike since late December 2006. It has a total of 33 rides under me and one race. The rear hub was serviced (routine) last Spring by a kick ass mechanic. It has the normal scratches one would associate with MTB riding. There is some wear from my heel on the non drive side. I sanded off a little surface rust and touched it up with auto touch up (blue). and I wrapped some black electrical tape over it. I also treated the frame with Frame saver when I got it.

So, that's about it. I plan to take some better pics tonight - these are from when I first built it, but you get the idea..

First $700 takes it. $750 if I have to ship it to you. Although you should really just come to RI and ride Arcadia (or Big River) and buy my bike!

bdee
April 21st, 2008, 09:51 PM
More new pictures below: