PDA

View Full Version : Pre NEMBAFest sale White, Nok Studs etc


bdee
September 4th, 2006, 12:11 PM
Pickup at NEMBAFest can be arranged for the below (preffered) if you are intersted please PM here or email - mtbdee@hotmail.com

White Industry ENO cranks - 175mm These are SS cranks, they come with a 32 (installed) and 36t ring. Square taper only ! Beautiful CNC cranks from White Industries. The only reason I'm parting with them is because I switched to forged 165mm cranks on my Karate Monkey. These are stiff (although not as stiff as forged cranks) and styling cranks gauranteed to pimp your ride.

Looking for $140 for the cranks with both rings.
(Retail is $185 for the cranks alone, the rings are $45 each and these do hold there resale value well).

info and a picture:

http://www.whiteind.com/ENO_Products/cranks.html

QBP 36 tooth 5 bolt chainring, used a little. Rampless (SS), silver, in great shape - $15

Cane Creek SCR - 5 Road levers, black. Brand new $25

Shimano Pedal (515s) older, silver, well used - $10

LX front hub, grey (HB-M570) 32h non disc - $8

Dicta Freewheel brand new, 18t - $8

Nokian Studded tires - 296s - the nice ones w/ a lot of studs. Properly broken in and ridden a bunch a few winters ago (when we had great ice riding conditions) - not so much since (maybe 3 rides?) and now I don't own a 26er so these gotta go - retail on these is ~ $180/pair.
I'll take $90 for these.

I'm not setting up a table so if you want anything PM me and let me know, and I'll bring it to the event. I'll most likely be racing on Sunday as well.

MMcG
September 5th, 2006, 10:56 AM
Brendan - you could run those cranks in a 1x9 set up correct?

bdee
September 5th, 2006, 12:49 PM
I suppose you could - there's just no easy way to run a bashguard to help keep the chain in place. I have run a 1x6 w/out a bashguard with some other cranks just fine, but I'd say at least use a 3rd eye on the inside for sure.