Parts For Sale [wheels, fork, brakes etc]

[CouchingTiger]

36 hole Sun Rhyno Lite/Shimano XT/LX non-disk wheelset with Tioga 1.25" slicks. Bombproof urban commuter setup. $60

2002 RockShox Psylo XC w/ 9" steerer in very good shape, [$OLD]

Cannondale Moto FR 4" dual crown tandem fork, $95

Magura Raceline Tandem rim brakeset, in great shape, $60

24 spd Sachs Twist Shifters, $10

Kestrel EMS carbon 1" threaded road fork w/ Shimano XT headset, $25

Azonic riser bars free w/ any purchase

I also have lots of other stuff as well. I'd be willing to trade anything for/towards a set of dual pivot road calipers in good shape.

Can also probably make up a near complete build kit for real cheap with the parts above and other goods I have in the hopper.

-Couch

[C.P.]

How much steerer left on the Kestrel fork?
I know a fellow nemba freind who needs one.
If it's like 7-8 inches, that should do, and I'll buy it.

Thanks

Chris

[CouchingTiger]

How much steerer left on the Kestrel fork?
I know a fellow nemba freind who needs one.
If it's like 7-8 inches, that should do, and I'll buy it.

Thanks

Chris


I'll measure but I bet it's at least 9". It came off from a 57cm frame.

-Couch

[splat]

Chris

I have a Kestrel Fork that we put on my Wifes BIke , But she did not like it . it is also a 1 inch threaded off of a 51 CM bike .

Remeber with threaded steerer tubes they haveto be close to the right legnth to start.

[CouchingTiger]

OK, just measured it. 7 3/4" threaded down to 5 3/4".

-Couch

[Rip]

PM'd my interest in the 2002 Psylo.

[C.P.]

OK, just measured it. 7 3/4" threaded down to 5 3/4".

-Couch

Okay - I'll take a measurement and let you know if it works.
thanks
CP

[bike187]

assuming the fork has a metal steerer, as it's long enough, i'm pretty sure you can have threads cut/tapped on to it. you'd just have to go to a decent size shop to find the tool probably.

[Rip]

Bumping, interested in the psylo.

[CouchingTiger]

Bump, still got the stuff. Would like to see it go.

-Couch

[Rip]

PM sent.

[mattyb]

hey couch, you wouldnt have a 20mm thru-axle front hub would you?

[CouchingTiger]

hey couch, you wouldnt have a 20mm thru-axle front hub would you?


Sorry, don't have one.

-Couch

[CouchingTiger]

Bump, still have the wheels and stuff (except the Psylo).

-Couch

Would you be willing to trade the wheels for a Black electric range, brand new out of box with 4 prong cord.
You know you could use the range to bake powder coated parts in thus expanding your fork lower finishing hobby.

If you have enough parts to get my commuter back together (i scavanged it for the Homegrown project) I would even deliver the range.

[MMcG]

Would you be willing to trade the wheels for a Black electric range, brand new out of box with 4 prong cord.
You know you could use the range to bake powder coated parts in thus expanding your fork lower finishing hobby.

If you have enough parts to get my commuter back together (i scavanged it for the Homegrown project) I would even deliver the range.


Bill - check your PMs. I might just have some hoops for ya.

Mark

[SteveC]

Justbill--I may be interested in the black range.....tell me more.....
Steve Cobble

[Slider]

Couch - still got the wheelset? Will PM you, too.

Slider